它采用激光焊叶轮,比其它生产商的传统点焊叶轮更坚固,更耐用。良好的水压设计使整个泵装置能够达到上述平均功率,从而降低泵整个使用寿命中的运转成本。此外,坚固的传动灯和熔模铸造不锈钢止回阀以及加固的吸水过滤器也是该泵的几大优点。
最大扬程为550米,最大流量为9万升每小时,液体温度等于40摄氏度时可以用指定的发动机进行工作。整个泵装置用高级不锈钢制造,对于处理剧烈水流,还有更高级的铬镍钼钢制的泵。
同时,该泵还配有一个可交换的适配器为每位客户提供多种管道连接选择,使用户拥有3种无须松开管道闸门螺纹的或折边的连接类型。因此,客户只须备有一个单独的泵变量,这样可以使泵简化,节约存货。这个简单的配置使泵装置非常人性化。
New 6-Inch Submersible Borehole Pumps
In Septemper 2006, Frankenthal, Germany-based KSB Aktiengesellschaft will be launching a new submersible borehole pump type which meets even the stringent demands of ACS, the French drinking water regulations. The UPA 150C is designed to be used in water supply, irrigation, lowering of ground water levels, pressure boosting and fire protection.
Its impellers are laser-welded for greater ruggedness and stability than conventional spot-welded impellers from other manufacturers. The hydraulically f
avourable design enables the pump sets to achieve above average efficiencies, resulting in low running costs over the entire service life of the pump. Other benefits are the sturdy drive lantern and the check valve made of investment cast stainless steel as well as a reinforced suction strainer.
The maximum discharge head is 550 metres and the maximum flow rate 90,000 litres per hour. Fluid temperatures up to 40 °C can be hand
led depending on the motor selected. The entire pump set is constructed of high-grade stainless steel. It is also available in higher grade CrNiMo steel for handling aggressive fluids.
An exchangeable adapter provides a variety of pipe connec¬tion options, offering customers three threaded or flanged connection types each without having to undo the tie bolts. As a result, customers only have to stock a single pump variant, which allows them to reduce their pump and spares inventories. Its simple configuration makes the pump set very service-friendly.
The re-windable electric motors are available in closely spaced sizes, so the optimum drive power can be selected for every application. Couplings and drive flanges have mating dimensions to NEMA standards (NATIONAL ELE
CTR
ICAL MANUFACTURERS ASSOCIATION).