美国peter paul电子公司的产品目前主要应用在能源、石化装备、LNG、医疗器械、汽车引擎（氢气项目）、工程器械液压系统、船舶制造、高端仪器设备、高端储存罐、高压测试仪器、燃烧控制系统、气体压缩系统、饮料罐装设备电磁阀等领域；PPE产品拥有：微型（最大只有几厘米大）、耐高压（特殊可以达到10000PSI）、****（UL\CSA****认证）、低功耗（最小功耗0.5W）等优势。从应用功能分为：****、高压、自保持式、喷射式、旋转式等专业电磁阀。

制氢制氧设备专用电磁阀部分型号参数如下：

SPECIFICATIONS

SERIES 20—MODEL H22

Three-way normally closed valve for high pressure applications. Valve

must be mounted within 30° of vertical.

OPERATING CONDITIONS

✝Media: Air and other non-corrosive gases, water and oil.

Valve Temperature Range: Standard Valve-0°F(-18°C) to 104°F(40°)

ambient; 0°F (-18°C) to 150°F(65°C)

media. Optional Valves can tolerate much

higher or much lower ambient and media

temperatures. Consult factory for specifics.

Burst Pressure: 5000 PSI

Maximum Operating Pressure Differential: to 3000 PSI

✝To insure trouble free operation, filtration down to 60 microns or less is recommended.

ELECTRICAL CHARACTERISTICS

Coil Voltage: 5 to 825 VAC, 50-60 Hz. 1.8 to 265 VDC

Nominal Power: H22 EH 22

A.C. 7.7 watts A.C. 7.3 watts

D.C. 9.5 watts D.C. 9.5 watts

Coil Construction: Standard valve—molded and non-molded

Explosion Proof valve–molded coil and

3rd wire ground (standard)

Typical Response Time on Air: 4-16 milliseconds

MECHANICAL CHARACTERISTICS

Body: Stainless Steel

Orifice Diameter: 1/32” - 3/32”

Porting: 1/8” and 1/4" NPT

Housing: Standard valve–1⁄₂" NPT conduit and grommet

Explosion Proof valve–1⁄₂" NPT conduit with 3rd

Wire Ground (EP only)

STANDARD

GROMMET HOUSING

EXPLOSION PROOF

Listings: Valves are U.L. Listed and CSA Certified for Hazardous Locations—Class I,

Div 1, Group C and D - Class II, Div 1, Groups E, F, and G; Div 2 Groups

A,B,C,D,E,F, and G.

深圳市德腾机电设备有限公司独家代理美国Peter Paul 电磁阀，包括****电磁阀、高压****电磁阀、自锁式电磁阀、磁保持式电磁阀、低功耗电磁阀、低功率电磁阀、超高压电磁阀、试验零泄漏电磁阀、医疗材质用的医疗电磁阀等。

制氢制氧设备专用电磁阀其他型号或其他关于阀体、端口、密封、电气连接等选项请咨询代表处。