标准编号 |
标准中文名称 |
标准英文名称 |
GB/T18689-2002 |
农业灌溉设备小型手动塑料阀 |
Agricultural irrigation equipment--Manually operated small plastics valves |
NF T54-082-1988 |
塑料.热固塑料阀.耐压和密封性试验 |
(PLASTICS. THERMOPLASTIC AND THERMOSETTING VALVES. TEST OF RESISTANCE TO PRESSURE.) |
BS EN 1704-1997 |
塑料管道系统.热塑塑料阀.弯曲情况下温度循环后阀门完整性的试验方法 |
(Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending) |
EN 28233-1990 |
热塑性塑料阀门 扭矩 试验方法 |
Thermoplastics valves- Torque; test method (ISO 8233:1988) |
EN 28659-1990 |
热塑性塑料阀门 疲劳强度 试验方法 |
Thermoplastic valves- Fatigue strength- Test method (ISO 8659:1989) |
BS EN 28233-1992 |
热塑性塑料阀门的扭矩试验方法 |
(Thermoplastics valves - Torque - Test method) |
BS EN 28659-1992 |
热塑性塑料阀门.疲劳强度.试验方法 |
(Thermoplastics valves - Fatigue strength - Test method) |
ISO 7349-1983 |
热塑塑料阀.连接基准 |
(Thermoplastics valves; Connection references) |
ISO 8659-1989 |
热塑塑料阀门.疲劳强度.试验方法 |
(Thermoplastics valves; fatigue strength; test method) |
ISO 8233-1988 |
热塑塑料阀门.扭矩.测试方法 |
(Thermoplastics valves; torque; test method) |
ISO 9393-2 Technical Corrigendum 1-1997 |
热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和 |
(Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves; Technical Corrigendum 1) |
ISO 9393-1-1994 |
热塑性塑料阀门.压力试验方法.第1部分:总则 |
(Thermoplastics valves - Pressure test methods and requirements - Part 1: General) |
ISO 9393-2-1997 |
热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和 |
(Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves) |
ISO 9911-1993 |
农业灌溉设备.手工操做小型塑料阀门 |
(Agricultural irrigation equipment; manually operated small plastics valves) |