Available Standard Voltage: |
100-110 volts 50 HZ; 100-120 volts 60 HZ; 24 volts D.C.; 110 volts D.C. |
Inlet Pressure Range: |
30 TO 125 PSIG (2 TO 8.5 BAR). |
Pilot Pressure Range: |
Pilot Pressure must be equal to or greater than inlet pressure. |
Power Consumption: |
Each solenoid: 87 VA inrush, 30 VA holding on 50 or 60 Hz; 14 watts on D.C. |
Ambient Temperature Range: |
40 TO 120 F (4 TO 50 C) |
Media Temperature Range: |
40 TO 175 F (4 TO 80 C) |
Flow Media: |
Filtered Air. |
Manual Override: |
Flush, rubber (non-locking) |
External Pilot Supply: |
No |
Wiring Type: |
Hard Wired via Terminal Strip (1/2 inch Conduit). |
Monitor Voltage: |
Used Same Voltage and Frequency as Pilot Solenoid, But Supply Must be Independent and Continuous. |