1.最大压力指入口最大压力，连续工作压力指工作压差.
2.马达不能同时在最高压力和最大转速下工作.
3.在断续工作条件下，运行时间每分钟不能超过10%.
4.推荐用68#抗磨液压油，粘度37-73cSt，清洁度ISO18/13
5.最高工作油温80°
6.马达满负荷工作前，应在最高工作压力的40%以下磨合1h.
7.马达允许最大背压10MPa，但推荐不要超过5MPa，超过时应接外泄油管.
1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure
2. Motor should not work under the highest pressure and the maximum speed
3. The running time should not exceed 10% under intermittent working conditions
4. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.
5. The Maximum working temperature is 80 °
6. One hour running time under 40% of maximum working pressure is recommended before
